Der Flex12 ist ein bifunktioneller Hochleistungslautsprecher mit einem 12“ Tiefmitteltonchassis und 1“Horntreiberkombination


  • • Front of house system
  • • Wedge
  • • Frontfill / Nearfill / Backround
  • • Rotatable CD horn
  • • Bi-functional enclosure design

The Flex12 is a compact bi-functional high power loudspeaker and comes equipped with a 12“ cone loudspeaker and a 1” high frequency driver. The 75° x 50° radiating horn is rotatable and can achieve 50° x 75° directivity.

A complex passive crossover matches the components working perfectly together and allows a full-range application without additional electronics. The enclosure of the Flex12 is angle symmetrical and allows mirrored use.
The Flex12 is a universal tool which can be used as a small FoH speaker, as a compact wedge with very low profile, and in combination with our Flex-Series Subs, as a mid-high unit.

For easy and efficient cable connection as a wedge or near-fill, 4 Speakon NL4 connectors are available, 2 on the rear and 1 NL4 each on the top and on the bottom.


15 mm birch plywood with structure paint and monitor angles
Basic layout
2-way passive system, bass-reflex tuning
Protective Grille
1.5 mm grille, covered with acoustic foam
12“ neodymium low-mid speaker 1“ ND compression driver with 1.7“ voice coil rotatable CD-Horn passive crossover with phase correction
Frequency Response
75 Hz–19,5 kHz
Power handling RMS | peak
400 W RMS | 1.600 W Peak
Nominal Impedance
8 Ω
Dispersion pattern
75° x 50°
98 dB
130 dB | peak | 1 m
NL4: 1+/1-, 4 each - 2 on the rear, 2 on the bottom
Dimensions (w x h x d)
380 x 622 x 293 mm
net weight
19 kg
U-bracket, double flight case
transport cover