Der Flex15 ist ein flexibel einsetzbarer Lautsprecher mit 15“ Tiefmitteltonchassis und 1“ Horntreiberkombination


  • • Front of house system
  • • Wedge
  • • Frontfill / Nearfill
  • • Rotatable CD horn
  • • Bi-functional enclosure design

The Flex15 is a bi-functional high power loudspeaker and is equipped with a 15“ cone loudspeaker and a 1” high frequency driver. The 75° x 50° radiating horn is rotatable and can achieve a 50° x 75° directivity.

A complex passive crossover matches the components working perfectly together and allows for a full-range application without additional electronics.
The Flex15 is a universal tool which can be used as a FoH speaker, as well as a wedge in combination with our Flex-Series Subs as a mid-high unit.

For easy and efficient cable connection as a wedge or near-fill, 4 Speakon NL4 are available. There are two connectors on the rear and two on the bottom.

15 mm birch plywood with structure paint and monitor angles
Basic layout
2-way passive system, bass-reflex tuning
Protective Grille
1.5 mm grille, covered with acoustic foam
15“ neodymium low-mid speaker 1“ ND compression driver with 1.7“ voice coil rotatable CD-Horn passive crossover with phase correction
Frequency Response
70 Hz–19,5 kHz
Power handling RMS | peak
400 W RMS | 1.600 W Peak
Nominal Impedance
8 Ω
Dispersion pattern
75° x 50°
98 dB
130 dB | peak | 1 m
NL4: 1+/1- , 4 times, 2 on the rear, 2 on the bottom
Dimensions (w x h x d)
450 x 700 x 390 mm
net weight
22 kg
U-bracket, double flight case, transport cover