10 Zoll Tiefmitteltonlautsprecher i.flex10 mit 1“ Kompressionstreiber und 1.4“ Schwingspule


  • • Conference-, trainingsrooms
  • • Sport- and multipurpose hall
  • • Theatre
  • • Musicals
  • • Adventure parks
  • • Clubs

The i.Flex10 is a 2-way full range cabinet which is driven by an integrated passive crossover.
It is equipped with a direct radiating 10” low-mid speaker and a 1” compression driver on a rotatable CD horn.

The horn, with a directivity of 90° x 60°, can be rotated to reach coverage of 60° x 90°.

An elaborated passive  crossover provides phase corrected alignment of these components. Many flying and mounting points in the i.flex10 are fitted in the enclosure to enable an easy installation with combination of available accessories.

The i.flex10 is suitable for public address applications up to a distance of 15 meters. No system controller is required because of its linear setup.


15 mm birch plywood with structure paint
Basic layout
2-way passive system, bass-reflex tuning
Protective Grille
1.5 mm grille, covered with acoustic foam
10“ low-mid speaker 1“ compression driver with 1.4“ voice coil rotatable CD-Horn passive cross-over with phase correction
Frequency Response
85 Hz–20 kHz
Power handling RMS | peak
250 W RMS | 1.000 W Peak
Nominal Impedance
8 Ω
Dispersion pattern
90° x 60°
96 dB
126 dB | peak | 1 m
NL4: 1+/1-
Dimensions (w x h x d)
310 x 480 x 300 mm
net weight
12 kg
100V transformer, special paint, RAL colours, horizontal or vertical u-bracket, miscellaneous special mountings