MagnusCompact

Die Magnus Compact ist mit zwei 5 Zoll Neodym Tiefmittelton- sowie einem 1 Zoll Neodym Kompressionstreibern bestückt.

Application

  • • Worship / Live Music
  • • Conferences
  • • Corporate Events
  • • Delay Lines
  • • Expandable with subs formaing up a powerful front PA
  • • FOH loudspaker system

The Magnus Compact fills the gap between the Magnus12 and our Picospot. It is essential for all applications requiring maximum acoustic efficiency and extremely compact speaker dimensions. Outstanding speech intelligibility combined with excellent dispersion characteristics make the Magnus Compact the ultimate product.

The MagnusCompact is equipped 2 x 5” Neodymium drivers and 1 x 1” Compression driver in d´Apollito arrangement. The Horn can be rotated by 90° and has a dispersion of 90°x60°. The nicely shaped enclosure is Pu coated and withstands the rigours of touring business and suboptimal weather conditions.

The Magnus Compact can be used as a fullrange or migh-high system in combination with our Subwoofers. For practical use in the field, we developed a special bracket which can be used for vertical and horizontal pitch.

The Magnus series has been engineered for semi-active drive and thus unites the economic advantages of a passively crossed over loudspeaker with the sound quality, reliability and performance of an actively (i.e. DSP) controlled system. Its internal passive network provides optimal frequency division and phase alignment of both ways, and thus excellent directivity characteristics. Equalization, speaker protection and powering is provided through our AD-Systems Impuls series system amplifiers.

 

Enclosure
12/15 mm birch plywood w/ Polyurea coating, 55° wedge angle
Basic layout
2-Way passive, bass reflex tuning
Protective Grille
1.5 mm sheet steel, hex-stamped, black acoustic foam on inside
Components
2 x 5“ ND low mid woofer w/ 1.5“ voice coil
1.0“ ND compression driver w/ 1.4“ VC on 90° x 60° BEM CD-Horn passive crossover w/ phase correction
Frequency Response
75 Hz–18 kHz +/-3 dB
Power handling RMS | peak
250 W RMS | 1.000 W Peak
Nominal Impedance
12 Ω
Dispersion pattern
90° x 60° constant coverage
Sensitivity
92 dB Lo-Mids, 108 dB High
SPLmax
122 dB | peak | 1 m
Connectors
NL4: 1+/1- x 3, 2 on the rear, 1 x on the bottom
Dimensions (w x h x d)
160 x 450 x 160 mm
net weight
7 kg
Accessories
Pan-tilt bracket, road case, padded transport bag