TouringStick

The TouringStick is a line source system equipped with 4x 6.5 inch low-frequency neodymium drivers and 3x 1-inch neodymium drivers

Application

  • • Worship
  • • Live Music
  • • Conferences
  • • Corporate Events
  • • Delay Lines
  • • Expandable with subs formaing up a powerful front PA

6.5″ Quad Line-Source Loudspeaker

The AD-Systems TouringStick represents the new generation of line source speakers. With it´s capability to handle 700 Watts of power, its compact size, easy-to-mount rigging hardware and all benefits of todays linearray technology – the TouringStick fills the gap between linearrays and point source systems.

Long throw and focused vertical dispersion

The Touringstick is a compact two-way line array column equipped with four 6.5″ neodymium speakers and three 1″ compression drivers on an asymmetrical Waveguide. With its dispersion of 90°x20°, precise audience coverage, reduced reflections, improved sound quality, and outstanding speech intelligibility are assured.

Good handling and elegant design

Each speaker weighs only 21 kg and is equipped with 3 Neutrik Speakons. Accessories for tripod use or flying hardware are also available. The cabinet is PU coated and withstands the rigors of the touring business and suboptimal weather conditions.

The TouringStick is designed to work with a dedicated system controller. It should be used only with AD-Systems-certified Presets or an AD-Systems DSP-amplifier.

Application

• Worship, Live Music
• Conferences, Corporate Events
• Delay Lines
• Expandable with subs to form a powerful front PA

Specifications

• 4x 6.5″ Neodymium low mid woofer with 2.0″ voice coil
• 3x 1.0″ Neodymium compression driver with 1.5″ voice coil
• Power handling: 700 Watts RMS | 2,000 Watts Peak
• 4 Neutrik Speakon NL4 connectors
• Passive Phase Correction Network (PPCN Technology)
• Heavily braced plywood with Polyurea coating, 55° wedge angle

Call us for a demonstration

See other speakers from the Touring-Series

Get an overview of other high-end loudspeaker from AD-Systems. If you have any questions, please do not hesitate to contact us. Current prices for our TouringStick loudspeaker as well as the current product catalog are available on request.

• Product overview of our Touring product series

Enclosure
Birch plywood with Polyurea coating, 55° wedge angle
Basic layout
2-Way passive, bass reflex tuning
Protective Grille
1.5 mm sheet steel, hex-stamped, black acoustic foam on inside
Components
4 x 6.5″ Neodymium low mid woofer with 2.0″ voice coil
3 x 1.0″ Neodymium compression driver
with 1.5″ VC on 90° x 20 ° BEM
Passive Phase Correction Network (PPCN Technology)
Frequency Response
70 Hz–18 kHz +/-3 dB
Power handling RMS | peak
700 Watts RMS | 2,000 Watts Peak
Nominal Impedance
8 Ω
Dispersion pattern
90° x 20°
Sensitivity
98 dB Lo-Mids, 109 dB High
SPLmax
133 dB | peak | 1 m
Connectors
Neutrik Speakon NL4: 1+/1- , x 3
Dimensions (w x h x d)
20 x 105 x 28 cm
net weight
21 kg
Optional
100 Volt transformer (ELA)
Optional colours RAL or NCS

TS – Double Flight Case

Double Case for safe transport and storage of two TStick loudspeakers. The transport box has a practical toolcompartment. Order number: 7011000850  

TS – Polemount

Polemount for vertical tilt application. Order number: 7011000871

TS – Connector

The connector allows the installation of two TSticks as a double stapling configuration. Order number: 7011000873

TS – Flying Kit

Flying Kit for pitch in 1° Steps. Tilt angle: -28.5 to +3.0 ° or -16.0 to +2.0 (staked)  incl. L-Handle screw M10 x 30 . Order number: 7011000872